Linus Tech Tips Blog » Water Cooling

Primochill Typhoon III Water Cooling Reservoir and Pump Top Unboxing & First Look

Linus — Thu, 17 Dec 2009 10:29:18 +0000

Another completely self-indulgent unboxing of water cooling stuff! The Typhoon III is a very unique reservoir, so you should check this out whether you care about water cooling or not. Also I edited a video for the first time.

Swiftech MCR320 Stack Water Cooling Radiator Unboxing

Linus — Tue, 24 Nov 2009 02:57:59 +0000

Today I’m unboxing a triple 120mm water cooling radiator from Swiftech. This is the “stack” version of their MCR320 QP or “quiet power”

Frozen Q PC Mods Liquid Fusion T-Virus Water Cooling Reservoir Unboxing

Linus — Wed, 18 Nov 2009 02:53:02 +0000

Today I’ll be unboxing something that interests me, and very few other people, but you will have to indulge me because I’ve not been feeling well enough to go into the warehouse and get other stuff out. This came to me in the mail.

CoolIT Boreas – A monster

Linus — Thu, 24 Sep 2009 04:48:33 +0000

So I got a new toy today. The CoolIT Boreas MTEC cooler. I had NO idea how big this thing was, but I’ll definitely find some room for it on my test bench over the next few weeks. I want to test it in a variety of different configurations as follows:

Bone Stock
Stock with better CPU block
Stock with better pump & bigger tubing

I borrowed a kill-a-watt thing from work today to find out if I even have room in my build for this monster (power wise) and it looks like I’m going to be pushing my system to the max. Load readings for my system while running Prime95 and playing Batman Arkham Asylum peaked at around 710W. Once I add the Boreas I’ll be sitting at 850W of power consumption under load from my system. At 85% loading, many PSUs lose their efficiency and quiet operation, so we’ll see how well the HX1000 holds up to the task. Since the HX1000 is a multi-rail PSU, I’ll also have to consider the implications of which plug I put it into.

I’m thinking i5 is probably the platform most people are interested in, but I’m also curious to see how it stacks up against my current water cooling solution, in which case I would need to throw it on the i7… I’ll decide that later. Here are some pics for scale of this thing. I can’t think of a case anywhere you could actually mount this thing in. Not even the Corsair Obsidian 800D!

More to come.

Water cooled demo PC for our new Aberdeen store

Linus — Mon, 14 Sep 2009 03:03:02 +0000

I was given the task of creating an eye catching demo system for our new Aberdeen store which will be opening in the next little while. I decided to bring take it with me on Friday as a homework project for the weekend (as if I didn’t have enough to do this weekend…) and I’m quite pleased with the results. It’s a bit of an “all show and no go” configuration with the Intel X38 “BoneTrail” motherboard and an ASUS 8800GTX, but since those parts look slick I decided to run with it. Here are some day photos that I took. I will add some night ones once I have a chance to take them (maybe at night would be a good time for that)

edit: NIGHT SHOTS!!

NCIX Tech Tips #20 – CoolIT Systems Domino ALC & Outdoor Experiment

Linus — Mon, 29 Dec 2008 21:43:01 +0000

Well a new Tech Tips is finally here. It’s not what we wanted to release (frankly) and we have some very exciting other stuff coming up soon, but we saw the weather outside, and it’s something I’ve toyed with a few times, so we thought “What the hey” and packed our junk outside.

Look for the Domino ALC to show up at an NCIX near you in the coming weeks!

MIPS RAM Freezer 4 Will Work on Tri-Channel Memory Kits

Linus — Mon, 17 Nov 2008 19:00:10 +0000

….. With some modifications. Here is a picture of the RAM Freezer 4 on top of a Gigabyte EX58-EXTREME motherboard with all of the DIMM slots populated.

As you can see, if you are running 3 modules in tri-channel, the RAM Freezer 4 is just wide enough to be able to get RAM spreaders on both sides, but you will need to remove the material in the middle of the RAM Freezer 4 in order to get a RAM spreader on the middle module. Overall with a Dremel the mod should not be very complicated and should not affect the structural integrity of the RAM Freezer.

Nehalem Build is Almost Ready to Go!

Linus — Mon, 17 Nov 2008 07:23:51 +0000

Well here’s my real upcoming Nehalem build. My last post about it was a bit of a joke. I’m not really good at taking night shots so this one is a little bit overexposed, which is most evident in the tubing. I’m very happy with the results of this setup though. Looking forward to getting a CPU to pop in there.

The ES 965 I’ve been playing with had to go back to the person who owns it.

Gigabyte EX58-EXTREME – Suitable for Water Cooling?

Linus — Fri, 07 Nov 2008 06:52:50 +0000

My quest for a suitable X58 platform began with the requirement for SLI compatibility. All of the high end X58 boards I’ve seen so far have that checkbox filled. The next big requirement was slot layout. Currently I’m using two dual slot water cooled graphics cards (no desire to go full cover at this time), a PCI sound card (that can go as I’m only using it for mic in with an optical connection to my Onkyo TX-SR605), a PCIe 1x Intel gigabit NIC, and I’d really like to upgrade to a PCIe 8x RAID card in the near future.

Gigabyte really FUBARed the slot layout of the EX58-EXTREME with that weird heatsink that attaches to the northbridge… It blocks the top PCIe 1x and the PCIe 4x slot… But at least you can remove it. Boards like the Foxconn Blood Rage and the ASUS P6T, although appealing, simply won’t accommodate my expansion needs. The P6T Deluxe layout I just don’t understand… Why put the two bottom PCIe 16x slots next to each other?

The Gigabyte board has everything I need: Dual PCIe 16x physical with another that is electrically only 8x for a RAID card (3Ware tech I was talking to today says a lot of consumer boards will not properly work with an 8x card in a 16x electrical slot…). It also has a very robust cooling solution. Above you can see the naked board as well as a shot of how it’s attached to the board from the underside.

Here you can see the integrated water cooling solution with 3/8″ ID 5/8″ OD Primochill tubing on it. It fits great and these barbs are surprisingly good quality for an integrated affair. Gigabyte recommends 1/2″ OD tubing though and you can see the reason for it. With the Extreme Heatpipe dealie installed, 5/8″ OD tubing is a tight fit.

I was a little disappointed with the overall fit and finish of the water cooling solution. It does appear to be ALL copper (kudos to Gigabyte), and the base appears very flat and shiny, but the finish on the actual northbridge heatpipe assembly is VERY rough and not flat at all. I can’t imagine it will make very good contact, especially without thermal compound over the whole thing. That said, it’s good enough for my purposes and I’m not looking to set any world records.

NCIX Now Carries XSPC Products!

Linus — Wed, 05 Nov 2008 08:07:39 +0000

They’ve landed! It’s been a long time coming, but these products really represent a tremendous value.

My original hesitation to bring in XSPC came about because of the reports I was hearing about some of their blocks leaking. That coupled with the low price made me think “cheap crap” and I don’t want to take a risk like that with my customers…

They’ve worked hard to turn that around though. They’re using a more expensive delrin substitute for their traditional plexi tops, and the machining on the base of the blocks looks more than adequate.

You can check out the range of XSPC products we’ve picked up at the XSPC store. I’m hoping to get images and product descriptions updated ASAP.